Working Frequency: | W\N Band, W: 0.5~20MHz; N: 1.5~3MHz | Warranty: | 2 Years |
---|---|---|---|
Sensitivity Surplus: | ≥60dB (200Φ2 FBH) | Probe Delay Available: | 0~999.9μs |
Weight: | Around 0.9kg (with Battery & In-built Charger) | Discernibility: | ≥36dB (mated With 5MHzΦ14 Transducer) |
Attenuator Error: | Per 12dB ±1dB | ||
Highlight: | phased array flaw detector,ut flaw detector |
Ultrasonic Flaw Detector TFD900
The TFD900 is an ultra-light handy UT instrument of outstanding performance. Compatible with EN12668-1:2010,
Highlights of TFD900
☆ Curved Surface Consideration
☆ DGS & DAC functional Curve
☆ RF Waveforming Mode
☆ Recording (1 Hour in Total)
☆ Echo Crest Tracking
☆ Enveloping (for Waveform Comparison)
☆ AWS D1.1 Evaluation Module
☆ API 5UE Evaluation Module
☆ Performance Indices Test
☆ 1000 Frames of A-scan Storage
☆ ComApp for PC Review and Report Print
☆ 0.9kg in Weight
Features:
· Circuitry of advanced design and sampling frequency up to 640MHz ensure instant and accurate display and analysis of flaw signals even when they’re weak.
· State-of-the-art square wave drive technique
· Weighing only 0.9kg, convenient for operation and taking it along
· TG, full WVGA TFT display
· 8+ hour battery life promises consecutive working, inbuilt smart-type battery charger, auto-switching between the status of charging and that of powering.
· External USB port for software upgrading, data transferring and printing, graftable to mouse, keyboard and USB disc.
· EN12668:2000 compatible
Specification
Attenuator Error | Per 12dB ±1dB |
Equivalent Input Noise | <80×10-9 V/√HZ^ |
Pulse Type | -ve square wave, Tv: 25~250V ; tunable with 25V per step |
Working Modes | TR ; T&R |
Damping | 40080 Ohm |
Working Frequency | WN Band, W: 0.5~20MHz; N: 1.5~3MHz |
Gain | 0.0~110.0dB; 0.11.02.06.0 dB per step; smart speed-up at 0.1dB |
Material Velocity | 1000~15000m/s tunable; preset 30 frequently-used Vs optional |
Display Reachable | 0.0~10000mm LW at steel velocity tunable with min 0.1mm per step |
Rectification | Positive, Negative, Full, RF (1002plus) |
Gate & Alarm | Dual gates, hardware driving real-time alarming; |
Spotting: peak | |
Display | TG, TFT 5.6 inch WVGA color display, resolution 800×480 |
Pulse Shift Range | -7.5~3000μs |
Probe Delay Available | 0~999.9μs |
PRF | 25~800Hz, auto adaptation |
Vertical Linearity Error | ≤3% |
Horizontal Linearity Error | ≤0.2% |
Sensitivity Surplus | ≥60dB (200Φ2 FBH) |
Discernibility | ≥36dB (mated with 5MHzΦ14 transducer) |
Dynamic Range | ≥32dB |
Rejection | (0~90) %, without any dent to linearity or gain |
NL | <10% |
Ports | BNC probe connector |
USB HOST | |
Power Supply | Large-capacity Li battery without memory effect; battery life: 8+ hrs; |
In-built battery charger (independent charger optional); AC: 220V | |
DustSplashWater Proof | IP54 |
UT Standards | Compatible with EN12668-1 |
Meets JB/T 10061-1999 | |
Ambient Temperature | -30~50℃ |
Relative Humidity | 20%~95% |
Weight | Around 0.9kg (with battery & in-built charger) |
Dimension | Upper Part: 215mm×126mm×53mm |
Lower Part: 215mm×104mm×42mm |