logo
news
Home > News> Company News

News

china latest news about Ultrasonic Probe Frequency Selection Guide

Ultrasonic Probe Frequency Selection Guide

August 25, 2026

Proper ultrasonic probe frequency selection is critical for accurate NDT testing. The core rule is a trade-off: higher frequency = better resolution for tiny defects, while lower frequency = stronger penetration with less attenuation. Below is a concise, industry-standard selection guide for three ...
china latest news about Daily Calibration and Storage Guidelines for Test Blocks

Daily Calibration and Storage Guidelines for Test Blocks

August 4, 2026

I. Preface The standardization of calibration and storage for test blocks directly determines the accuracy of test data and affects compliance with engineering quality acceptance requirements. To prevent testing errors and specimen failure, key specifications for routine calibration and storage of ...
china latest news about New Release: TFD-N91 Non-metallic Ultrasonic Detector

New Release: TFD-N91 Non-metallic Ultrasonic Detector

July 29, 2026

Brief Introduction TMTeck Instrument launches the brand-new TFD-N91 Non-metallic Ultrasonic Detector, an all-in-one testing device designed for concrete, rock mass, foundation piles and various non-metallic engineering materials. Adopting ultrasonic transmission technology, it integrates multiple ...
china latest news about Guide to Probe Maintenance & Cable Protection – Extend Service Life of NDT Accessories

Guide to Probe Maintenance & Cable Protection – Extend Service Life of NDT Accessories

July 23, 2026

Ultrasonic probes and cables are vulnerable components of NDT testing systems. Damaged crystals, wear plates or cable shielding will cause unstable waveforms, low signal-to-noise ratio and unreliable inspection results. Proper maintenance helps extend service life and lower operating costs. Probe ...
china latest news about Handheld X-Ray Fluorescence Spectrometer TMANALY 095 Series

Handheld X-Ray Fluorescence Spectrometer TMANALY 095 Series

March 31, 2026

Features 1. Small, light and easy to carry, analyzer automatically power on when install with battery. 2. High-speed processing chip, advanced algorithm and high-responsive software, resulting in even faster analysis. 3. High-performance X-ray Tube, Ultra-high Resolution Detector combined with ...
china latest news about Surface roughness Tester and Application Area

Surface roughness Tester and Application Area

December 24, 2025

1. What is a Surface Roughness Tester? A surface roughness tester (also called a profilometer or roughness gauge) is a precision instrument used to measure the micro‑scale irregularities on the surface of a material. It works by moving a diamond stylus along the surface, detecting the vertical ...
china latest news about Ultrasonic thickness gauge and its application area

Ultrasonic thickness gauge and its application area

December 24, 2025

What is an Ultrasonic Thickness Gauge? An ultrasonic thickness gauge is a non‑destructive testing (NDT) instrument used to measure the thickness of a material by using ultrasonic waves. The basic principle is: - A probe sends ultrasonic waves into the test object. ​ - The waves travel through the ...
china latest news about Ultrasonic Flaw Detector TFD800C PLUS

Ultrasonic Flaw Detector TFD800C PLUS

May 28, 2025

Introduction Ultrasonic flaw detector is a portable industrial non-destructive flaw detection instrument, which can quickly, conveniently, non-destructively and accurately detect, locate, evaluate and diagnose various defects (cracks, looseness, pores, inclusions, etc.) inside the workpiece. It can ...
china latest news about How to choose the right Tmteck ultrasonic transducer?

How to choose the right Tmteck ultrasonic transducer?

April 15, 2021

How to choose the right Tmteck ultrasonic transducer? A ultrasonic transducer that performs well in one application will not always produce the desired results in a different application. For example, sensitivity to small defects is proportional to the product of the efficiency of the transducer as ...
china latest news about TMTeck-made ultrasonic probes perfectly work with GE Ultrasonic thickness gauge DM5E

TMTeck-made ultrasonic probes perfectly work with GE Ultrasonic thickness gauge DM5E

April 14, 2021

TMTeck-made ultrasonic probes perfectly work with GE Ultrasonic thickness gauge DM5E TMTECK-Instrument, one of Chinese leading NDT instrument manufacturer, always devotes its efforts to exploit the core technology in ultrasonic transducers as well, now successed in producing all kinds of ultrasonic ...
1 2