|Specification Of Die:||φ25mmφ30mmφ40mmφ50mm||Power Supply:||220-255V 50HZ|
|Max Power Consumption:||1600W||System Pressure:||0~2Mpa|
metallurgical sample preparation,
metallographic sample preparation equipment
Features and Applications:
1. Used to set up irregular specimen so that it can fix in with the request of the surface.
2. It also can protect the edge and keep out of the abrasion.
3. It is an automatic mounting press for metallographic specimen. Suitable for all thermosetting materials because of the cooling system
4. It can finish automatically with the heating temperature, the holding time, and acting force.
5. The operator can change 4 specification patterns according to the difficult specimen.
6. It can make 2 specimens at one time.
|Specification of Die||φ25mmφ30mmφ40mmφ50mm|
|Power supply||220-255V 50HZ|
|Max Power Consumption||1600W|
|Heat Holding Time||0-99 min&99 sec.|
|Type of Cooling||Water-cooled|